Difference between revisions of "Laser Rangefinder"

From OCAD 12 Wiki - English
Jump to navigation Jump to search
Line 9: Line 9:
 
===Laser Distance Meter Drawing Tool===
 
===Laser Distance Meter Drawing Tool===
  
Choose the [[File:LaserDistance.PNG]] '''Laser distance meter drawing mode'''. The '''Laser Distance Meter''' dialog appears.
+
Choose the [[File:Icon_LaserDistance.PNG]] '''Laser distance meter drawing mode'''. The '''Laser Distance Meter''' dialog appears.
  
 
===Drawing options===
 
===Drawing options===

Revision as of 13:10, 22 November 2011

A connection to Laser Distance Meters can be setup via a serial COM port. Use Bluetooth for the data transfer from the Laser Distance Meter to the computer.

  1. Choose Connect to Laser Distance Meter from the GPS menu.
  2. Set device, port and speed.
  3. Click to the Test button to test the connection.

File:ConnectToLaserDistanceMeter.PNG


Laser Distance Meter Drawing Tool

Choose the Icon LaserDistance.PNG Laser distance meter drawing mode. The Laser Distance Meter dialog appears.

Drawing options

Settings for different working processes can be done in the OptionsTab.

Direction: Choose between Foresight and Backsight.
Foresight: Measure forwards from your known position to a place with unknown position.
Backsight Measure backwards from a place with known position to your unknown position.
Traverse mode: Choose between Linear traverse and Radial traverse
Linear traverse: Measure a series of points. A measured point is the start position for the next measurement.
Radial traverse: Measure a series of points. The start position is always the same.

Draw measures data automatically:

Turn on this option if measured positions should be added to the map automatically. Otherwise each position must be confirmed by the user.

File:OptionTab.PNG

Drawing

  1. Set a reference point: Set it by clicking on the map or get the GPS position.
  2. Measure the features position. Depending on the Draw measures data automatically option the positions are added to the map automatically or they must be confirmed.
  3. Finish a feature by clicking the Stop button.

File:DataTab.PNG


Back to GPS