Beispiel Stromleitung: Unterschied zwischen den Versionen

Aus OCAD 11 Wiki - Deutsch
Zur Navigation springen Zur Suche springen
(kein Unterschied)

Version vom 28. Oktober 2011, 10:22 Uhr

powerline

This is a double line with a tag at each pylon. The pylons are defined as corner symbols. That means, at each corner point, a pylon will be drawn. Use the Straight tool to draw power lines. Then you automatically get corner points at each pylon.

To create this symbol start from an empty line symbol and then do the following steps:

In the Symbols page:

  1. In the line Corner symbol click Edit to go to the symbol editor. There you can draw the tag for pylons. After closing the symbol editor, the Corner symbol box is checked automatically.

In the Double Line page:

  1. Choose Full lines for Mode.
  2. Enter the distance between the lines (excluding the lines) for Width.
  3. For the Left line choose color and line width.
  4. For the Right line choose color and line width.

This is an example where a double line is used without infill.


Back to: : Chapter 6: Create a New Symbol