Beispiel Gestrichelte Nebenstrasse

Aus OCAD 11 Wiki - Deutsch
Version vom 31. Oktober 2011, 15:28 Uhr von Admin (Diskussion | Beiträge) (Created page with "File:MajorRoadMiddleLineFrameDashed.PNG To create this symbol, start from an empty line symbol and then do the following steps: In the Main Line page: # Enter '''Line color...")
(Unterschied) ← Nächstältere Version | Aktuelle Version (Unterschied) | Nächstjüngere Version → (Unterschied)
Zur Navigation springen Zur Suche springen

MajorRoadMiddleLineFrameDashed.PNG

To create this symbol, start from an empty line symbol and then do the following steps:

In the Main Line page:

  1. Enter Line color and Line width.

OutDashed MainLine.PNG

In Distance page:

  1. Enter the dash length of the center line in Main length a.
  2. Enter the length of the gap in the center line in Main gap C.

OutDashed Distances.PNG

In Double line page:

  1. Choose Full lines for Mode.
  2. Enter the width of the yellow infill in Width.
  3. Check Fill.
  4. Choose the white color in Fill color. Note that this color must be below the color of the dashed line in the color table, otherwise it will cover the dashed line. In addition, it must be above the color of the sidelines, otherwise crossings are not cleared automatically.

In Framing page:

  1. Enter Line color and Line width.

OutDashed Framing.PNG


Back to Create a New Symbol