Beispiel Gestrichelte Nebenstrasse

Aus OCAD 11 Wiki - Deutsch
Zur Navigation springen Zur Suche springen


To create this symbol, start from an empty line symbol and then do the following steps:

In the Main Line page:

  1. Enter Line color and Line width.

OutDashed MainLine.PNG

In Distance page:

  1. Enter the dash length of the center line in Main length a.
  2. Enter the length of the gap in the center line in Main gap C.

OutDashed Distances.PNG

In Double line page:

  1. Choose Full lines for Mode.
  2. Enter the width of the yellow infill in Width.
  3. Check Fill.
  4. Choose the white color in Fill color. Note that this color must be below the color of the dashed line in the color table, otherwise it will cover the dashed line. In addition, it must be above the color of the sidelines, otherwise crossings are not cleared automatically.

OutDashed DoubleLine.PNG

In Framing page:

  1. Enter Line color and Line width.

OutDashed Framing.PNG

Download link: [Example_DashedMinorRoad.ocd]

Back to Create a New Symbol