Beispiel Gestrichelte Linie: Unterschied zwischen den Versionen

Aus OCAD 11 Wiki - Deutsch
Zur Navigation springen Zur Suche springen
Zeile 1: Zeile 1:
 
To create this symbol, start from an empty line symbol and then do the following steps:
 
To create this symbol, start from an empty line symbol and then do the following steps:
  
[[File:dashedline.gif|dashed line]]
+
[[File:DashedLine.PNG]]
  
 
In the '''Main Line''' page:
 
In the '''Main Line''' page:
 
# Choose the '''Line color'''.
 
# Choose the '''Line color'''.
 
# Enter the '''Line width'''.
 
# Enter the '''Line width'''.
 +
 +
[[File:DashedLine_MainLine.PNG]]
 +
 
In the '''Distances''' page:
 
In the '''Distances''' page:
 
# Enter the length of the dash in '''Main length a'''.
 
# Enter the length of the dash in '''Main length a'''.
 
# Also enter the length of the dash in '''End length b'''.
 
# Also enter the length of the dash in '''End length b'''.
 
# Enter the length of the gap in '''Main gap c'''.
 
# Enter the length of the gap in '''Main gap c'''.
 +
 +
[[File:DashedLine_Distances.PNG]]
  
  
 
Back to: : [[Chapter 6: Create a New Symbol]]
 
Back to: : [[Chapter 6: Create a New Symbol]]

Version vom 31. Oktober 2011, 14:17 Uhr

To create this symbol, start from an empty line symbol and then do the following steps:

DashedLine.PNG

In the Main Line page:

  1. Choose the Line color.
  2. Enter the Line width.

DashedLine MainLine.PNG

In the Distances page:

  1. Enter the length of the dash in Main length a.
  2. Also enter the length of the dash in End length b.
  3. Enter the length of the gap in Main gap c.

DashedLine Distances.PNG


Back to: : Chapter 6: Create a New Symbol