Course Setting for Orienteering

From OCAD Wiki - English
Revision as of 13:39, 7 May 2024 by ANK (talk | contribs) (→‎Edit Course Setting Objects)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This function is available in OCAD Mapping Solution.This function is available in OCAD Orienteering.This function is available in OCAD Starter.This function is available in OCAD Course Setting.

CourseSettingExample.PNG

(The Course Setting functions are only available in course setting projects!)

OCAD provides completely integrated functions for course setting in orienteering.

Find here a PDF manual in English or German.

O-training with OCAD

You want to learn how to create Normal Courses, Relay Courses or Multitechnique Trainings?
Visit the O-training with OCAD page for more information.

CorridorExample.png
Corridor Training

Start a New Course Setting Project

For a Course Setting Project, you need two OCAD files:

- A [Course Setting File]
This is the file where manage your Course Setting Project, set courses and load a Background Map.
Like map files it has the extension .ocd, but it has a special internal mark to identify it as a course setting file.
- A [Map File]
This is your OCAD map which will be loaded as Background Map in your [Course Setting File].

CS Projekt.png


To start a New Course Setting Project, you must create a new [Course Setting File]. You have two options to do so:

A) New Course Setting Project Wizard

Choose the New Course Setting Project Wizard command from the File menu. This wizard guides you through the first steps like setting an event title and loading a map file in the background layer.

B) New Course Setting Project

  1. Choose the New command from the File menu or click the New button. The New File dialog box is displayed.
    CsFileNew.PNG
  2. In the Map type box select the Course setting project for orienteering item.
  3. Select a symbol set from the Load symbol set from box. For a course setting project in a scale where no symbol set is available please choose one of the available symbol sets.
  4. Choose the desired Language (not available for all Symbol Sets) and set the map scale to the correct value. It is important to do this before starting with course setting because the calculation of the courses length depends on the map scale.
    Hint.jpg You can also create own Symbol Sets and save them in your default symbol folder which is usually C:\Program Files\OCAD\OCAD 20xx Orienteering\Symbol
  5. Click the OK button.
  6. Choose the Save command from the File menu or click the Icon Save.PNG Save button. The Save As dialog box appears. Enter a file name for the [Course Setting File].
    You can save your course setting project as OCAD 10, OCAD 11, OCAD 12 or OCAD 2018 file. Please note, that some features may be lost according to the Compatibility Check.
    Pay attention to open/save Course Setting Files from OCAD 11 in OCAD 12 and vice versa, as many symbols and colors has changed between these two versions.
  7. Choose the Open command from the Background Map menu to open a [Map File] as a Background Map. The Background Map is normally an .ocd file, but you can also load a raster image (PNG, JPG, ...) as Background Map.
  8. Choose the Entire Map command from the View menu to show the whole map on the screen.
CsBox.PNG

The Course Setting Box is displayed on the right side of the OCAD window. This Course Setting Box provides a lot of functions and options. Visit the Edit Course Setting Objects page to get more information.

Compose Course

Learn on the Compose Course page, how to create and edit orienteering courses easily. This tool is very intuitve and fast.

ComposeCourseExample.png

Route Analyzer

Learn on the Route Analyzer page, how to analyze routes for all types of course setting projects (forest, urban, Ski-O, MTBO-O).
RA Buerenflue.png

Add Course Setting Objects

The Add Course Setting Objects page goes deeper than the Compose Course page. Read the following articles:

  1. Add Start, Controls and Finish
  2. Add a Marked Route
  3. Add the Map Issue Point
  4. Add a Control Description
  5. Add a Course Title
  6. Add Variant for Relay Courses. Learn how to create relay courses on the Create Relay Courses page.
  7. Add Start Numbers for Relay Courses. Learn how to create relay courses on the Create Relay Courses page.
  8. Add Other Objects, like the event title, logos, corrections on the map etc.
  9. Course Setting Dialog Box

AddCourseSettingObjects.png

Edit Course Setting Objects

Information about all functions which are provided by the course setting box on the right side of the window can be found on the Edit Course Setting Objects page.

Most important functions:
Change Code of Course Objects
Insert a Text Block
Lock or Unlock Course Objects
Edit Control Description
Add, Edit or Remove Course Objects
Preview Mode

EditCourseSettingObjects.png

Controls

The following two functions can be found in the Controls submenu of the Course Setting menu:

Renumber all Controls

This function is useful if you did not know the available control numbers for your event when starting to plan the courses.
Choose the Renumber all Controls command in the Controls submenu of the Course Setting menu to display the Renumber all Controls dialog.

CsRenumberAllControls.PNG

  1. Enter a New first code to shift all control codes. All codes are shifted with the difference between the New first code and the Old first code.
  2. Check the option Close numbering gaps if gaps with not used numbers should be closed.
  3. Click the OK button when finished.

Control Elevation

Visit the Control Elevation page to find more information about this function.

Courses

As a next step you can Create a New Course. A course is basically a list of the start, controls, marked route(s) and the finish. You may want to Insert Other Course Objects like mandatory crossing point, mandatory passage through out of bound area, map exchange, relay team or leg variation.

OCAD supports:

All information about courses can be found on the Create a New Course page.

Classes

In OCAD you can either work with courses only or you can use classes and courses. Different classes may use the same course, e.g. Course A -> Class W18, W16, M16; Course B -> W14, M14, Open Short.

Visit the Create a New Class page for more information.

Insert Course Object to Courses

Choose this function from the Course Setting menu. Learn more about this function on the Add a Course Object to Courses page.

Delete Course Object from Courses

This is the inverse function of the Insert Course Object to Courses function.

Read more about this function on the Delete Course Object from Courses page.

Make Graphic Modifications

Often it is necessary to Make Graphic Modifications to the courses generated by OCAD.

Move Control Number for All Courses

To move the control number for all courses (for example if it covers important map information):

  1. Change to Preview mode.
  2. Move a control number and keep it selected.
  3. Choose the Move Control Number for all Courses command from the Course Setting menu.
  4. The control number is moved for all other courses, too.

Edit Connection Line for All Courses

To edit a connection line for all courses (for example if it covers important map information):

  1. Change to Preview mode.
  2. Edit the connection line and keep it selected.
  3. Choose the Edit Connection Line for all Courses command from the Course Setting menu.
  4. The connection line is edited in all other courses which use it, too.

Edit Text Control Description

Choose the Edit Text Control Description command in the Course Setting menu to edit the text control description. Visit the Edit Text Control Description page for more information.

Auto Control Description

OCAD provides an Auto Control Description tool that recognizes map objects, where controls are placed, and sets the corresponding IOF symbol to the control description. Visit the Auto Control Description page for more information.

Punching Unit IDs

Choose the Punching Unit IDs command in the Course Setting menu to enter the punching unit IDs. Visit the Punching Unit IDs page for more information.

Course Statistic and Event Statistic

Choose the command Course Statistic and Event Statistic from the Course Setting menu to display a course and event statistic. Visit the page Course Statistic and Event Statistic for more information.

Consistency Check Report

Choose the command Consistency Check Report from the Course Setting menu to display the consistency check report. Visit the page Consistency Check Report for more information.

Compare Course Setting Files

The function Compare Course Setting Files is only enabled if no ocd file is open.

hint The Course Setting menu is not visible by default for OCAD Mapping Solution. Open and close a course setting file to make it visible.
  1. Add the files that should be compared to the files box.
  2. Click the Compare files button.
  3. The differences are shown in the dialog.
  4. Click the Save As... to save the text as html file.

The function shows the following differences between course setting files:

  • Different Course Objects
  • Different Courses
  • Different Preview Objects
  • Different Course Setting Options

Print

In the Print submenu of the Course Setting menu you have the option to print the Courses or the Control Descriptions.

Courses can be printed together with the map or on an already printed map. OCAD provides adjustment functions to adjust the course to the already printed map. In addition EPS files can be created to make plates for offset printing. Visit the Print Courses page for more information.

To get more information about printing control descriptions separately, visit the Print Control Descriptions page. Control descriptions can also be printed together with the course on the map: Add a Control Description Object.

Hint.jpg The Course Setting Printing page provides an overview of how orienteering courses can be printed in different ways.

Import

It is possible to import an OCAD Map, IOF XML Files or to import courses from ORware. Visit the Course Setting Import page for more information.

Export

OCAD provides different export options of course data for event software, courses as gpx file, course maps etc.
Visit the Course Setting Export page for more information.

Create PDF Files for Printing

Please use Export from the File menu if you want to create PDF files from the courses to provide them to the printery.
Please select the courses/classes in the Select Courses/Classes dialog that appears after clicking the Export button in the Export panel.

hint You can also export the PDF files from exported Course Maps. In that case the Select Courses/Classes dialog does no appear since a course map file contains only graphics.

Select courses/classes when exporting a PDF from a course setting project

Upload to SPORTident Center

Choose the Upload to SPORTident Center command from the Course Setting menu to upload maps, courses and course data directly to the SPORTident Center.

Upload to Livelox

The OCAD function Upload to Livelox can be found in the Course Setting menu of the OCAD programm. It will upload maps, courses and course data directly to Livelox.

Canvases

Choose the Canvases command from the Course Setting menu to export courses and classes of the same course setting project as pdfs in different scales and layouts.

Options

Choose the Options command from the Course Setting menu to get some Course Setting Options.