OCAD Wiki - English - User contributions [en]

Add Course Setting Objects

2011-11-29T07:07:31Z

80.238.207.158: /* Adding Other Objects */

''(This function is only available in course setting projects!)''

==Adding Start Controls and Finish==

'''Start'''

# Select the Start symbol [[File:cdstart.gif]] in the symbol box.
# Select any drawing mode.
# Click in the drawing area to place the object. Now the Course Object dialog box appears. It proposes the code S1 for the start.
# Click '''OK'''. On the right side of the screen you find now a line for a text description and a line for a symbolic description.
# If required enter a text description or a symbolic description.

'''Control'''

You create a control in the same way as the start object.

Select the Control symbol [[File:cdcontrol1.gif]] in the symbol box.

Here you should always enter either a text or a symbolic description or both.

'''Finish'''

You create the finish in the same way as the start object.

Select the Finish symbol [[File:csfinish1.gif]] in the symbol box.

But you cannot enter a description. The appearance of the finish in the symbolic control descriptions is determined by the marked route from the last control to the finish.

==Adding a Marked Route==

On most events you have a marked route from the last control to the Finish. Sometimes you may also have marked between controls (to cross bridges, dangerous areas etc.).

The description here applies to marked routes which the runner must use. If you want to add a marked route just for information, but which is not part of the course you have to add it as other object.

To create a marked route:

# Select the marked route [[File:Markedroute.gif]] in the symbol box.
# Select a drawing tool (e.g. the curve tool)
# Draw the marked route from the last control to the finish (in the direction in which the competitors are running).
# Now the Course Object dialog box appears automatically. If the course object dialog box does not appear automatically, you must make a modification for the marked route symbol. See below.
# Click '''OK'''.

This marked route is used for rendering the description of the finish in the control descriptions. If you check "Funnel tapes", then the symbol for funnel tapes will appear in the symbolic description.

You may also use marked routes anywhere in the course, but note that they must be drawn in the direction in which the competitors are running, otherwise the course will not be drawn correctly.

[[File:Hint.jpg]] -Important: Marked routes must be added to each course like controls and finish.

'''If the Course Object dialog box does not appear automatically'''

# Right-click on the Marked route symbol [[File:Markedroute.gif]] in symbol box.
# From the context menu select Edit. The Line Symbol dialog box appears.
# In the Main line page activate Course setting symbol: Marked route.
# Click OK.

==Adding a Control Description==

To print a control description together with the course you have to place a control description object. This object is a placeholder and marks the upper left corner of the control description.

# Select the control description symbol [[File:cdsymbol.gif]] in the symbol box.
# Select any drawing mode.
# Place an object to mark the upper left corner of the control description.
# The '''Course Object''' dialog box appears. You can leave the preset values unchanged and click '''OK'''.
# If you want a text description, activate '''Text description''' in the course setting panel on the right side of the screen.

If the background map should be masked below the text description, activate the option '''White background''' in Options from the Course menu.

==Adding a Course Title==

Normally you add the title of the course. OCAD allows you to use the course name, a list of all classes using that course or both as a course title.

To add a course title, you place a text object which is a placeholder for the course title. This text object will be filled with the course title in each course.

# Select the course title symbol [[File:coursetitle.gif]] in the symbol box.
# Select any drawing mode.
# Click on the map to place the text object.
# The Course Object dialog box appears automatically. If it does not appear automatically, you must make a modification to the course title symbol. See below.
# Click '''OK'''.
# The object appears with the text "Course". This text will be replaced with the course title in each course.

'''Define what is in the course title'''

You can choose whether the course title should contain the course name or a list of classes or both.

# Choose Options from the Course menu. The Course Options dialog box appears.
# Select the desired course title in the '''Course title''' box.

The same course title will also appear in controls descriptions.

'''If the Course Object dialog box does not appear automatically'''

# Right-click on the course title symbol [[File:coursetitle.gif]] in the symbol box.
# From the context menu select '''Edit'''. The Text Symbol dialog box appears.
# In the '''General''' page activate '''Course setting symbol''' and select '''Course title'''.
# Click '''OK'''.

==Adding Start Numbers for Relay Courses==

For relay courses, you must add the start number to the course in order to give the right map to the right runner.
To add a start number, you place a text object which is a placeholder for the start number. This text object will be filled with the start number in each course.

# Select the start number symbol [[File:startnumber.gif]] in the symbol box.
# Select any drawing mode.
# Click on the map to place the text object.
# The Course Object dialog box appears automatically. If it does not appear automatically, you must make a modification to the start number symbol. See below.
# Click '''OK'''.
# The object appears with the text "51.1". This text will be replaced with the start number on each map.

'''If the Course Object dialog box does not appear automatically'''

# Right-click on the start number symbol [[File:startnumber.gif]] in the symbol box.
# From the context menu select '''Edit'''. The Text Symbol dialog box appears.
# In the '''General''' page activate '''Course setting symbol''' and select '''Start number (relay)'''.
# Click '''OK'''.

==Adding Other Objects==

In a course overprint you may want to add other objects like:

* event title
* logo of the event
* date of the event
* corrections to the map
* other information relevant to the runner

The standard symbol set contains a symbol for the event title [[File:Event.gif]]. For other objects you may have to create your own symbols. It is important for these symbols that the option '''course setting symbol''' is switched '''off'''. The option '''course setting symbol''' must be used only for objects which belong to a course like controls, the marked route from the last control to the finish or the course title.

'''Example'''

If there is a marked route for children which you would like to appear on all other courses (just for information) you proceed as follows:

# Right-click the marked route symbol [[File:Markedroute.gif]] in the symbol box.
# Choose Duplicate from the context menu. A new symbol with the same icon is created.
# Right-click the new symbol.
# Choose Edit from the context menu.
# Deactivate '''Course setting symbol: Marked route'''.

Use this new symbol to draw the children course.

==Adding a Control Description==

To print a control description together with the course you have to place a control description object. This object is a placeholder and marks the upper left corner of the control description.

# Select the control description symbol in the symbol box.
# Select any drawing mode.
# Place an object to mark the upper left corner of the control description.
# The '''Course Object''' dialog box appears. You can leave the preset values unchanged and click OK.
# If you want a text description, activate '''Text description''' in the course setting panel on the right side of the screen.

If the background map should be masked below the text description, activate the option '''White background''' in Options from the Course menu.

Back to [[Course Setting for Orienteering]]

Add Course Setting Objects

2011-11-28T08:56:12Z

80.238.207.158:

''(This function is only available in course setting projects!)''

==Adding Start Controls and Finish==

'''Start'''

# Select the Start symbol [[File:cdstart.gif]] in the symbol box.
# Select any drawing mode.
# Click in the drawing area to place the object. Now the Course Object dialog box appears. It proposes the code S1 for the start.
# Click '''OK'''. On the right side of the screen you find now a line for a text description and a line for a symbolic description.
# If required enter a text description or a symbolic description.

'''Control'''

You create a control in the same way as the start object.

Select the Control symbol [[File:cdcontrol1.gif]] in the symbol box.

Here you should always enter either a text or a symbolic description or both.

'''Finish'''

You create the finish in the same way as the start object.

Select the Finish symbol [[File:csfinish1.gif]] in the symbol box.

But you cannot enter a description. The appearance of the finish in the symbolic control descriptions is determined by the marked route from the last control to the finish.

==Adding a Marked Route==

On most events you have a marked route from the last control to the Finish. Sometimes you may also have marked between controls (to cross bridges, dangerous areas etc.).

The description here applies to marked routes which the runner must use. If you want to add a marked route just for information, but which is not part of the course you have to add it as other object.

To create a marked route:

# Select the marked route in the symbol box.
# Select a drawing tool (e.g. the curve tool)
# Draw the marked route from the last control to the finish (in the direction in which the competitors are running).
# Now the Course Object dialog box appears automatically. If the course object dialog box does not appear automatically, you must make a modification for the marked route symbol. See below.
# Click '''OK'''.

This marked route is used for rendering the description of the finish in the control descriptions. If you check "Funnel tapes", then the symbol for funnel tapes will appear in the symbolic description.

You may also use marked routes anywhere in the course, but note that they must be drawn in the direction in which the competitors are running, otherwise the course will not be drawn correctly.

[[File:Hint.jpg]] -Important: Marked routes must be added to each course like controls and finish.

'''If the Course Object dialog box does not appear automatically'''

# Right-click on the Marked route symbol in symbol box.
# From the context menu select Edit. The Line Symbol dialog box appears.
# In the Main line page activate Course setting symbol: Marked route.
# Click OK.

==Adding a Control Description==

To print a control description together with the course you have to place a control description object. This object is a placeholder and marks the upper left corner of the control description.

# Select the control description symbol in the symbol box.
# Select any drawing mode.
# Place an object to mark the upper left corner of the control description.
# The '''Course Object''' dialog box appears. You can leave the preset values unchanged and click '''OK'''.
# If you want a text description, activate '''Text description''' in the course setting panel on the right side of the screen.

If the background map should be masked below the text description, activate the option '''White background''' in Options from the Course menu.

==Adding a Course Title==

Normally you add the title of the course. OCAD allows you to use the course name, a list of all classes using that course or both as a course title.

To add a course title, you place a text object which is a placeholder for the course title. This text object will be filled with the course title in each course.

# Select the course title symbol in the symbol box.
# Select any drawing mode.
# Click on the map to place the text object.
# The Course Object dialog box appears automatically. If it does not appear automatically, you must make a modification to the course title symbol. See below.
# Click '''OK'''.
# The object appears with the text "Course". This text will be replaced with the course title in each course.

'''Define what is in the course title'''

You can choose whether the course title should contain the course name or a list of classes or both.

# Choose Options from the Course menu. The Course Options dialog box appears.
# Select the desired course title in the '''Course title''' box.

The same course title will also appear in controls descriptions.

'''If the Course Object dialog box does not appear automatically'''

# Right-click on the course title symbol in the symbol box.
# From the context menu select '''Edit'''. The Text Symbol dialog box appears.
# In the '''General''' page activate '''Course setting symbol''' and select '''Course title'''.
# Click '''OK'''.

==Adding Start Numbers for Relay Courses==

For relay courses, you must add the start number to the course in order to give the right map to the right runner.
To add a start number, you place a text object which is a placeholder for the start number. This text object will be filled with the start number in each course.

# Select the start number symbol in the symbol box.
# Select any drawing mode.
# Click on the map to place the text object.
# The Course Object dialog box appears automatically. If it does not appear automatically, you must make a modification to the start number symbol. See below.
# Click '''OK'''.
# The object appears with the text "51.1". This text will be replaced with the start number on each map.

'''If the Course Object dialog box does not appear automatically'''

# Right-click on the start number symbol in the symbol box.
# From the context menu select '''Edit'''. The Text Symbol dialog box appears.
# In the '''General''' page activate '''Course setting symbol''' and select '''Start number (relay)'''.
# Click '''OK'''.

==Adding Other Objects==

In a course overprint you may want to add other objects like:

* event title
* logo of the event
* date of the event
* corrections to the map
* other information relevant to the runner

The standard symbol set contains a symbol for the event title . For other objects you may have to create your own symbols. It is important for these symbols that the option '''course setting symbol''' is switched '''off'''. The option '''course setting symbol''' must be used only for objects which belong to a course like controls, the marked route from the last control to the finish or the course title.

'''Example'''

If there is a marked route for children which you would like to appear on all other courses (just for information) you proceed as follows:

# Right-click the marked route symbol in the symbol box.
# Choose Duplicate from the context menu. A new symbol with the same icon is created.
# Right-click the new symbol.
# Choose Edit from the context menu.
# Deactivate '''Course setting symbol: Marked route'''.

Use this new symbol to draw the children course.

==Adding a Control Description==

To print a control description together with the course you have to place a control description object. This object is a placeholder and marks the upper left corner of the control description.

# Select the control description symbol in the symbol box.
# Select any drawing mode.
# Place an object to mark the upper left corner of the control description.
# The '''Course Object''' dialog box appears. You can leave the preset values unchanged and click OK.
# If you want a text description, activate '''Text description''' in the course setting panel on the right side of the screen.

If the background map should be masked below the text description, activate the option '''White background''' in Options from the Course menu.

Back to [[Course Setting for Orienteering]]

XML Script

2011-11-28T08:45:14Z

80.238.207.158: /* Shape */

(This function is only available in OCAD Professional!)

Choose this command to execute functions whose settings are defined in a XML file.

==Introduction==

Select '''Execute XML Script''' from '''File''' menu.

==XML Script General==

===File===

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| File.Open || File || String || ocd file name
|-
| File.Close|| Enable || Boolean || true, false
|-
| File.Save || Enable || Boolean || true, false
|-
| File.SaveAs || File || String || ocd file name
|-
| File.MultipleFileImport || Directory CoordinateSystem NewOffset Horizontally Vertically Angle MapScale GridDistance LayerField || String Integer Boolean Integer Integer Double Integer Double String || Directory of import files -1 = WGS 84, 1000 = existing grid true, false            
|-
| File.ExportOIM || File || String || html file name
|-
| File.Exit || Enabled || Boolean || true, false Close OCAD Program
|}

===View===

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| View.EntireMap || Enable|| Boolean || true, false
|-
| View.MoveTo || X Y || Double Double ||  
|}

===Map===

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| Map. OptimizeRepair|| Enable|| Boolean || true, false
|-
| Map.ChangeScale || NewScale || Integer || e. g. 10 000
|-
|   || EnlargeReduceSymbols || Boolean || true, false
|-
| Map.ConvertLayer|| CrtFile || String || crt file name
|-
| Symbol.LoadSymbolsFrom || File || String || ocd file name (with symbols to be loaded) The option ''replace existing colors and symbols'' is used
|}

===Database===

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| Database.Dataset.Remove || Dataset || String Integer || all for all databases 3, 2, 1, ... for only one or several 
|-
| Database.Assign.Symbols || Dataset   CntFile || String Integer String || all for all databases 1, 2, 3, ... for only one database   ex. 101.0 true, false (Default)
|-
| Database.Assign.Texts || Dataset   TextField Symbol ReplaceExistingObjects || String Integer String String Boolean || all for all databases 1, 2, 3, ... for only one database   ex. 101.0 true, false (Default)
|-
| Database.Assign.Angles || Dataset   AngleField || String Integer String || all for all databases 1, 2, 3, ... for only one database  
|-
| Database.CreateObjects || Dataset SelectSymbol Condition HorizontalCoordinate VerticalCoordinate Unit TextField HorizontalOffset VerticalOffset || Integer Double String String String Enum. types String Double Double || 1, 2, 3, ... Number of dataset Symbol numer. ex. 207,0 SQL String (ex. SYMBOL LIKE 207,0) Database fieldname Database fieldname m, km Database fieldname    
|}

Example xml file:
<OcadScript>
<File.Open>
<File>C:\Albis\albis_leer.ocd</File>
</File.Open>
<File.MultipleFileImport>
<Directory>C:\Albis\shp</Directory>
<NewOffset>enabled</NewOffset>
<Horizontally>670000</Horizontally>
<Vertically>230000</Vertically>
<Angle>20</Angle>
<MapScale>20000</MapScale>
<GridDistance>500</GridDistance>
<LayerField>OBJECTVAL/LayerField>
</File.MultipleFileImport>
<Database.Assign.Texts>
<Dataset>all</Dataset>
<TextField>ID</TextField>
<Symbol>101.0</Symbol>
<ReplaceExistingObjects>true</ReplaceExistingObjects >
</Database.Assign.Texts>
<Database.Assign.Angles>
<Dataset>all</Dataset>
<AngleField>ID</AngleField>
</Database.Assign.Angles>

<Database.Assign.Symbols>
<Dataset>all</Dataset>
<CntFile>C:\Albis\cnt\Landeskarte.cnt</CntFile>
</Database.Assign.Symbols>
<Database.Dataset.Remove>
<Dataset>all</Dataset>
</Database.Dataset.Remove>
<Map.OptimizeRepair>
<Enabled>true</Enabled>
</Map.OptimizeRepair>
<View.EntireMap>
<Enabled>true</Enabled>
</View.EntireMap>
<File.Save>
<Enabled>false</Enabled>
</File.Save>
<File.SaveAs>
<File>C:\Albis\Albis2.ocd</File>
</File.SaveAs>
<File.Close>
<Enabled>true</Enabled>
</File.Close>
<File.Exit>
<Enabled>false</Enabled>
</File.Exit>
</OcadScript>

==XML Script Partial Map==
{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| export || file || String || eg.: ‚ c:\export\PartialMap1.ocd ‘ OCAD creates files PartialMap1_1_1.ocd, PartialMap1_1_2.ocd,
|-
| export || coordSystem || Enumerated types || mm (paper), m (real world)
|-
| export || T, L, B, R || Float || top, left, bottom, right
|-
| export.loop || enabled horizontalPages verticalpages horizontalOverlap verticalOverlap || Bool Integer Integer Float Float || true, false number of pages in horizontal direction number of pages in vertical direction horizontal overlap in mm or m vertical overlap in mm or m
|}

Example xml file:

<ocadScript> // comment
<partialMapScript>
<export id="0"> // first export section
<file>c:\export\PartialMap1.ocd</file> // export file
<coordSystem>mm</coordSystem> // paper oder real world coordinates
<T>100</T> // export rectangle with Top Left point and Bottom Right point
<L>0</L>
50
<R>50</R>
<loop> // the loop export several ocd files. For this example 21 files.
<enabled>true</enabled>
<horizontalPages>7</horizontalPages>
<verticalPages>3</verticalPages>
<horizontalOverlap>10</horizontalOverlap> // horizontal and vertical overlap.
<verticalOverlap>10</verticalOverlap>
</loop>
</export> // second export section
<export id="1">
<file>c:\export\PartialMap2.ocd</file>
<coordSystem>mm</coordSystem>
<L>0</L>
<R>50</R>
50
<T>100</T>
<loop>
<enabled>false</enabled>
</loop> // export only one ocd file
</export>
</partialMapScript>
</ocadScript>

==XML Script Print==

Print parameters can be saved in a XML script.

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| File.Print.Printer || Name DmPaperSize DmDefaultSource DmPrintQuality DmColor DmMediaType || String Integer Integer Integer Integer Integer || Eg. ,HP Color LaserJet 2840 PCL' 9 15 600 2 272
|-
| File.Print.Portrait || Enable || Bool || true, false
|-
| File.Print.SpotColor || Enable || Bool || true, false
|-
| FilePrint.PartialMap || Range L, R, B, T || Integer Float || 1 Left, Right, Bottom, Top
|-
| File.Print.HoizontalOverlap ||   || Float || -12,74
|-
| File.Print.VerticalOverlap ||   || Float || 8.74
|-
| File.Print.PrintScale ||   || Integer || Eg. 25000
|-
| File.Print.Copies ||   || Integer || Number of copies
|-
| File.Print.Intensity ||   || Integer ||  
|-
| File.Print.LineWidth ||   || Integer ||  
|-
| File.Print.PrintGrid || Enabled || Bool || true, false
|}

==XML Script Export==

===AI (Adobe Illustrator), PDF===

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| export || file || String || eg.: ,c::\Export\Chlosterwald.ai‘
|-
| export || format || Enumerated types || AI, PDF
|-
| export.partialMap || enabled coordSystem   L, R, B, T   || Bool Enumerated types   Float   || true, false mm (page), m (real world) [only if partialMap=enabled] left, right, bottom, top [only if partialMap=enable]
|-
| export || print Scale || Integer ||  
|-
| export || colors || Enumerated types || normal, spotColors
|-
| export || combine || Bool || true, false [only if color = spotColors]
|-
| export.spotColors || enabled || Spotcolor name || [only if color = spotColors]
|}

===BMP, GIF, JPEG===

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| export || file || String || eg.: ‚c:\Export\Chlosterwald.bmp‘
|-
| export || format || Enumerated types || BMP, GIF, JPEG
|-
| export || resolution || Integer ||  
|-
| export || anti-alias || Bool || true, false
|-
| export || colorCorrection || Bool || true, false
|-
| export.partialMap || enabled coordSystem   L, R, B, T   || Bool Enumerated types   Float   || true, false mm (paper), m (real world) [only if partialmap=enable] left, right, bottom, top [only if patialmap=enable]
|-
| export.tiles || enabled width height || Bool Integer Integer || true, false [only if enabled = true] [only if enabled = true]
|}

===EPS===

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| export || file || String || eg.: ‚c:\Export\Chlosterwald.eps ‘
|-
| export || format || Enumerated types || EPS
|-
| export.partialMap || enabled coordSystem   L, R, B, T   || Bool Enumerated types   Float   || true, false mm (paper), m (real world) [only if partialMap=enable] left, right, bottom ,top [only if partialMap=enable]
|-
| export || printScale || Integer ||  
|-
| export || colors || Enumerated types || normal, spotColors
|-
| export.spotColors || enabled || Spotcolor name || [only if colors = spotColors]
|}

===SVG (Scaleable Vector Graphics)===

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| export || file || String || eg.: ‚c:\Export\Chlosterwald.svg ‘
|-
| export || format || Enumerated types || SVG
|-
| export.partialMap || enabled coordSystem   L, R, B, T   || Bool Enumerated types   Float   || true, false mm (paper), m (real world) [only if partialMap=enable] left, right, bottom ,top [only if partialMap=enable]
|-
| export || printScale || Integer ||  
|-
| export || compressFile || Bool || true, false
|}

===TIFF===

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
|export || file || String || eg.: ‚c:\Export\Chlosterwald.tif‘ If spotColors is enabled and colorsCombine=false then the filename is ‚c:\Export\Chlosterwald. Spotcolor name.tif ‘
|-
|export || format || Enumerated types || TIFF
|-
|export || resolution || Integer ||  
|-
|export || anti-alias || Bool || true, false
|-
|export || colorCorrection || Bool || true, false
|-
|export.partialMap || enabled coordSystem   L, R, B, T   || Bool Enumerated types     Float   || true, false mm (paper), m (real world) [only if partialMap=enable] left, right, bottom ,top [only if partialMap=enable]
|-
|export.tiles || enabled width height || Bool Integer Integer || true, false [only if enabled = true] [only if enabled = true]
|-
|export.geoRefTiff || enabled pixelSize createWorldFile || Bool Float Bool ||true, false in meter [only if enabled = true] true, false [only if enabled = true]
|-
|export || colors || Enumerated types || normal, spotColors
|-
|export || colorsCombine || Bool || true, false [only if color = spotColors]
|-
|export.spotColors || enabled || Spotcolor name || [only if color = spotColors]
|-
|export || color Mode || Integer || 0 = 32 bit CMYK 1 = 24 bit RGB 2 = 256 colors 3 = grayscale 4 = 8 bit CMYK 5 = 1 bit black/white 6 = halftone screen
|-
|export || compression || Integer || 1 = no compression 2 = CCITT 4 = FaxG4 5 = LZW
|}

===DXF===

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| export || file || String || eg.: ‚c:\Export\Chlosterwald.dxf ‘
|-
| export || format || Enumerated types || DXF
|-
| export || printScale || Integer ||  
|-
| export || convertOem || Bool || true, false
|-
| export || convertUnicode || Bool || true, false
|-
| export || objectsSelSym || Bool || true, false
|-
| export || exportAsSplines || Bool || true, false
|-
| export || coordinates || Enumerated types || mm, m
|}

===Shape===

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| export || file || String || eg.: ‚c:\Export ‘ (only path name
|-
| export || format || Enumerated types || SHAPE
|-
| export || Enabled || Integer || 0 = point objects 1 = line objects 2 = area objects 3 = text object
|-
| export || Dataset || Integer || All = Dataset - All objects eg.: 2 (Objects in dataset with index = 2)
|}

===Example===

The following example export an AI file and some BMP tiles. Each exportScript node can contain many
children.

<ocadScript> // comment:
<exportScript>
<export id="1"> // first export section
<file>c:\export\test.ai</file> // export file
<format>AI</format> // file format
<partialMap>
<enabled>true</enabled>
<coordSystem>mm</coordSystem>
<L>0</L> // coordinates for the partial map
<R>50</R>
50
<T>100</T>
</partialMap>
<printScale>10000</printScale> // export scale
<colors>normal</colors> // cmky or spot colors
</export>
<export id="2"> // second export section
<file>c:\export\exp.bmp</file>
<format>BMP</format>
<resolution>300</resolution> // raster resolution
<anti-alias>true</anti-alias>
<colorCorrection>true</colorCorrection>
<partialMap>
<enabled>false</enabled>
</partialMap>
<tiles> // tiles export
<enabled>true</enabled> // tile dimensions
<width>500</width>
<height>500</height>
</tiles>
</export>
</exportScript>
</ocadScript>

Previous Chapter: [[Database]]

Next Chapter: [[Course Setting for Orienteering]]

Back to [[Main Page]]

XML Script

2011-11-28T08:44:41Z

80.238.207.158: /* XML Script Export */

(This function is only available in OCAD Professional!)

Choose this command to execute functions whose settings are defined in a XML file.

==Introduction==

Select '''Execute XML Script''' from '''File''' menu.

==XML Script General==

===File===

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| File.Open || File || String || ocd file name
|-
| File.Close|| Enable || Boolean || true, false
|-
| File.Save || Enable || Boolean || true, false
|-
| File.SaveAs || File || String || ocd file name
|-
| File.MultipleFileImport || Directory CoordinateSystem NewOffset Horizontally Vertically Angle MapScale GridDistance LayerField || String Integer Boolean Integer Integer Double Integer Double String || Directory of import files -1 = WGS 84, 1000 = existing grid true, false            
|-
| File.ExportOIM || File || String || html file name
|-
| File.Exit || Enabled || Boolean || true, false Close OCAD Program
|}

===View===

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| View.EntireMap || Enable|| Boolean || true, false
|-
| View.MoveTo || X Y || Double Double ||  
|}

===Map===

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| Map. OptimizeRepair|| Enable|| Boolean || true, false
|-
| Map.ChangeScale || NewScale || Integer || e. g. 10 000
|-
|   || EnlargeReduceSymbols || Boolean || true, false
|-
| Map.ConvertLayer|| CrtFile || String || crt file name
|-
| Symbol.LoadSymbolsFrom || File || String || ocd file name (with symbols to be loaded) The option ''replace existing colors and symbols'' is used
|}

===Database===

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| Database.Dataset.Remove || Dataset || String Integer || all for all databases 3, 2, 1, ... for only one or several 
|-
| Database.Assign.Symbols || Dataset   CntFile || String Integer String || all for all databases 1, 2, 3, ... for only one database   ex. 101.0 true, false (Default)
|-
| Database.Assign.Texts || Dataset   TextField Symbol ReplaceExistingObjects || String Integer String String Boolean || all for all databases 1, 2, 3, ... for only one database   ex. 101.0 true, false (Default)
|-
| Database.Assign.Angles || Dataset   AngleField || String Integer String || all for all databases 1, 2, 3, ... for only one database  
|-
| Database.CreateObjects || Dataset SelectSymbol Condition HorizontalCoordinate VerticalCoordinate Unit TextField HorizontalOffset VerticalOffset || Integer Double String String String Enum. types String Double Double || 1, 2, 3, ... Number of dataset Symbol numer. ex. 207,0 SQL String (ex. SYMBOL LIKE 207,0) Database fieldname Database fieldname m, km Database fieldname    
|}

Example xml file:
<OcadScript>
<File.Open>
<File>C:\Albis\albis_leer.ocd</File>
</File.Open>
<File.MultipleFileImport>
<Directory>C:\Albis\shp</Directory>
<NewOffset>enabled</NewOffset>
<Horizontally>670000</Horizontally>
<Vertically>230000</Vertically>
<Angle>20</Angle>
<MapScale>20000</MapScale>
<GridDistance>500</GridDistance>
<LayerField>OBJECTVAL/LayerField>
</File.MultipleFileImport>
<Database.Assign.Texts>
<Dataset>all</Dataset>
<TextField>ID</TextField>
<Symbol>101.0</Symbol>
<ReplaceExistingObjects>true</ReplaceExistingObjects >
</Database.Assign.Texts>
<Database.Assign.Angles>
<Dataset>all</Dataset>
<AngleField>ID</AngleField>
</Database.Assign.Angles>

<Database.Assign.Symbols>
<Dataset>all</Dataset>
<CntFile>C:\Albis\cnt\Landeskarte.cnt</CntFile>
</Database.Assign.Symbols>
<Database.Dataset.Remove>
<Dataset>all</Dataset>
</Database.Dataset.Remove>
<Map.OptimizeRepair>
<Enabled>true</Enabled>
</Map.OptimizeRepair>
<View.EntireMap>
<Enabled>true</Enabled>
</View.EntireMap>
<File.Save>
<Enabled>false</Enabled>
</File.Save>
<File.SaveAs>
<File>C:\Albis\Albis2.ocd</File>
</File.SaveAs>
<File.Close>
<Enabled>true</Enabled>
</File.Close>
<File.Exit>
<Enabled>false</Enabled>
</File.Exit>
</OcadScript>

==XML Script Partial Map==
{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| export || file || String || eg.: ‚ c:\export\PartialMap1.ocd ‘ OCAD creates files PartialMap1_1_1.ocd, PartialMap1_1_2.ocd,
|-
| export || coordSystem || Enumerated types || mm (paper), m (real world)
|-
| export || T, L, B, R || Float || top, left, bottom, right
|-
| export.loop || enabled horizontalPages verticalpages horizontalOverlap verticalOverlap || Bool Integer Integer Float Float || true, false number of pages in horizontal direction number of pages in vertical direction horizontal overlap in mm or m vertical overlap in mm or m
|}

Example xml file:

<ocadScript> // comment
<partialMapScript>
<export id="0"> // first export section
<file>c:\export\PartialMap1.ocd</file> // export file
<coordSystem>mm</coordSystem> // paper oder real world coordinates
<T>100</T> // export rectangle with Top Left point and Bottom Right point
<L>0</L>
50
<R>50</R>
<loop> // the loop export several ocd files. For this example 21 files.
<enabled>true</enabled>
<horizontalPages>7</horizontalPages>
<verticalPages>3</verticalPages>
<horizontalOverlap>10</horizontalOverlap> // horizontal and vertical overlap.
<verticalOverlap>10</verticalOverlap>
</loop>
</export> // second export section
<export id="1">
<file>c:\export\PartialMap2.ocd</file>
<coordSystem>mm</coordSystem>
<L>0</L>
<R>50</R>
50
<T>100</T>
<loop>
<enabled>false</enabled>
</loop> // export only one ocd file
</export>
</partialMapScript>
</ocadScript>

==XML Script Print==

Print parameters can be saved in a XML script.

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| File.Print.Printer || Name DmPaperSize DmDefaultSource DmPrintQuality DmColor DmMediaType || String Integer Integer Integer Integer Integer || Eg. ,HP Color LaserJet 2840 PCL' 9 15 600 2 272
|-
| File.Print.Portrait || Enable || Bool || true, false
|-
| File.Print.SpotColor || Enable || Bool || true, false
|-
| FilePrint.PartialMap || Range L, R, B, T || Integer Float || 1 Left, Right, Bottom, Top
|-
| File.Print.HoizontalOverlap ||   || Float || -12,74
|-
| File.Print.VerticalOverlap ||   || Float || 8.74
|-
| File.Print.PrintScale ||   || Integer || Eg. 25000
|-
| File.Print.Copies ||   || Integer || Number of copies
|-
| File.Print.Intensity ||   || Integer ||  
|-
| File.Print.LineWidth ||   || Integer ||  
|-
| File.Print.PrintGrid || Enabled || Bool || true, false
|}

==XML Script Export==

===AI (Adobe Illustrator), PDF===

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| export || file || String || eg.: ,c::\Export\Chlosterwald.ai‘
|-
| export || format || Enumerated types || AI, PDF
|-
| export.partialMap || enabled coordSystem   L, R, B, T   || Bool Enumerated types   Float   || true, false mm (page), m (real world) [only if partialMap=enabled] left, right, bottom, top [only if partialMap=enable]
|-
| export || print Scale || Integer ||  
|-
| export || colors || Enumerated types || normal, spotColors
|-
| export || combine || Bool || true, false [only if color = spotColors]
|-
| export.spotColors || enabled || Spotcolor name || [only if color = spotColors]
|}

===BMP, GIF, JPEG===

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| export || file || String || eg.: ‚c:\Export\Chlosterwald.bmp‘
|-
| export || format || Enumerated types || BMP, GIF, JPEG
|-
| export || resolution || Integer ||  
|-
| export || anti-alias || Bool || true, false
|-
| export || colorCorrection || Bool || true, false
|-
| export.partialMap || enabled coordSystem   L, R, B, T   || Bool Enumerated types   Float   || true, false mm (paper), m (real world) [only if partialmap=enable] left, right, bottom, top [only if patialmap=enable]
|-
| export.tiles || enabled width height || Bool Integer Integer || true, false [only if enabled = true] [only if enabled = true]
|}

===EPS===

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| export || file || String || eg.: ‚c:\Export\Chlosterwald.eps ‘
|-
| export || format || Enumerated types || EPS
|-
| export.partialMap || enabled coordSystem   L, R, B, T   || Bool Enumerated types   Float   || true, false mm (paper), m (real world) [only if partialMap=enable] left, right, bottom ,top [only if partialMap=enable]
|-
| export || printScale || Integer ||  
|-
| export || colors || Enumerated types || normal, spotColors
|-
| export.spotColors || enabled || Spotcolor name || [only if colors = spotColors]
|}

===SVG (Scaleable Vector Graphics)===

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| export || file || String || eg.: ‚c:\Export\Chlosterwald.svg ‘
|-
| export || format || Enumerated types || SVG
|-
| export.partialMap || enabled coordSystem   L, R, B, T   || Bool Enumerated types   Float   || true, false mm (paper), m (real world) [only if partialMap=enable] left, right, bottom ,top [only if partialMap=enable]
|-
| export || printScale || Integer ||  
|-
| export || compressFile || Bool || true, false
|}

===TIFF===

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
|export || file || String || eg.: ‚c:\Export\Chlosterwald.tif‘ If spotColors is enabled and colorsCombine=false then the filename is ‚c:\Export\Chlosterwald. Spotcolor name.tif ‘
|-
|export || format || Enumerated types || TIFF
|-
|export || resolution || Integer ||  
|-
|export || anti-alias || Bool || true, false
|-
|export || colorCorrection || Bool || true, false
|-
|export.partialMap || enabled coordSystem   L, R, B, T   || Bool Enumerated types     Float   || true, false mm (paper), m (real world) [only if partialMap=enable] left, right, bottom ,top [only if partialMap=enable]
|-
|export.tiles || enabled width height || Bool Integer Integer || true, false [only if enabled = true] [only if enabled = true]
|-
|export.geoRefTiff || enabled pixelSize createWorldFile || Bool Float Bool ||true, false in meter [only if enabled = true] true, false [only if enabled = true]
|-
|export || colors || Enumerated types || normal, spotColors
|-
|export || colorsCombine || Bool || true, false [only if color = spotColors]
|-
|export.spotColors || enabled || Spotcolor name || [only if color = spotColors]
|-
|export || color Mode || Integer || 0 = 32 bit CMYK 1 = 24 bit RGB 2 = 256 colors 3 = grayscale 4 = 8 bit CMYK 5 = 1 bit black/white 6 = halftone screen
|-
|export || compression || Integer || 1 = no compression 2 = CCITT 4 = FaxG4 5 = LZW
|}

===DXF===

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| export || file || String || eg.: ‚c:\Export\Chlosterwald.dxf ‘
|-
| export || format || Enumerated types || DXF
|-
| export || printScale || Integer ||  
|-
| export || convertOem || Bool || true, false
|-
| export || convertUnicode || Bool || true, false
|-
| export || objectsSelSym || Bool || true, false
|-
| export || exportAsSplines || Bool || true, false
|-
| export || coordinates || Enumerated types || mm, m
|}

===Shape===

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| export || file || String || eg.: ‚c:\Export ‘ (only path name
|-
| export || format || Enumerated types || SHAPE
|-
| export || Enabled || Integer || 0 = point objects 1 = line objects 2 = area objects 3 = text object
|-
| export || Dataset || Integer || All = Dataset - All objects eg.: 2 (Objects in dataset with index = 2)
|}

'''Example'''

The following example export an AI file and some BMP tiles. Each exportScript node can contain many
children.

<ocadScript> // comment:
<exportScript>
<export id="1"> // first export section
<file>c:\export\test.ai</file> // export file
<format>AI</format> // file format
<partialMap>
<enabled>true</enabled>
<coordSystem>mm</coordSystem>
<L>0</L> // coordinates for the partial map
<R>50</R>
50
<T>100</T>
</partialMap>
<printScale>10000</printScale> // export scale
<colors>normal</colors> // cmky or spot colors
</export>
<export id="2"> // second export section
<file>c:\export\exp.bmp</file>
<format>BMP</format>
<resolution>300</resolution> // raster resolution
<anti-alias>true</anti-alias>
<colorCorrection>true</colorCorrection>
<partialMap>
<enabled>false</enabled>
</partialMap>
<tiles> // tiles export
<enabled>true</enabled> // tile dimensions
<width>500</width>
<height>500</height>
</tiles>
</export>
</exportScript>
</ocadScript>

Previous Chapter: [[Database]]

Next Chapter: [[Course Setting for Orienteering]]

Back to [[Main Page]]

XML Script

2011-11-28T08:44:03Z

80.238.207.158: /* XML Script Export */

(This function is only available in OCAD Professional!)

Choose this command to execute functions whose settings are defined in a XML file.

==Introduction==

Select '''Execute XML Script''' from '''File''' menu.

==XML Script General==

===File===

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| File.Open || File || String || ocd file name
|-
| File.Close|| Enable || Boolean || true, false
|-
| File.Save || Enable || Boolean || true, false
|-
| File.SaveAs || File || String || ocd file name
|-
| File.MultipleFileImport || Directory CoordinateSystem NewOffset Horizontally Vertically Angle MapScale GridDistance LayerField || String Integer Boolean Integer Integer Double Integer Double String || Directory of import files -1 = WGS 84, 1000 = existing grid true, false            
|-
| File.ExportOIM || File || String || html file name
|-
| File.Exit || Enabled || Boolean || true, false Close OCAD Program
|}

===View===

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| View.EntireMap || Enable|| Boolean || true, false
|-
| View.MoveTo || X Y || Double Double ||  
|}

===Map===

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| Map. OptimizeRepair|| Enable|| Boolean || true, false
|-
| Map.ChangeScale || NewScale || Integer || e. g. 10 000
|-
|   || EnlargeReduceSymbols || Boolean || true, false
|-
| Map.ConvertLayer|| CrtFile || String || crt file name
|-
| Symbol.LoadSymbolsFrom || File || String || ocd file name (with symbols to be loaded) The option ''replace existing colors and symbols'' is used
|}

===Database===

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| Database.Dataset.Remove || Dataset || String Integer || all for all databases 3, 2, 1, ... for only one or several 
|-
| Database.Assign.Symbols || Dataset   CntFile || String Integer String || all for all databases 1, 2, 3, ... for only one database   ex. 101.0 true, false (Default)
|-
| Database.Assign.Texts || Dataset   TextField Symbol ReplaceExistingObjects || String Integer String String Boolean || all for all databases 1, 2, 3, ... for only one database   ex. 101.0 true, false (Default)
|-
| Database.Assign.Angles || Dataset   AngleField || String Integer String || all for all databases 1, 2, 3, ... for only one database  
|-
| Database.CreateObjects || Dataset SelectSymbol Condition HorizontalCoordinate VerticalCoordinate Unit TextField HorizontalOffset VerticalOffset || Integer Double String String String Enum. types String Double Double || 1, 2, 3, ... Number of dataset Symbol numer. ex. 207,0 SQL String (ex. SYMBOL LIKE 207,0) Database fieldname Database fieldname m, km Database fieldname    
|}

Example xml file:
<OcadScript>
<File.Open>
<File>C:\Albis\albis_leer.ocd</File>
</File.Open>
<File.MultipleFileImport>
<Directory>C:\Albis\shp</Directory>
<NewOffset>enabled</NewOffset>
<Horizontally>670000</Horizontally>
<Vertically>230000</Vertically>
<Angle>20</Angle>
<MapScale>20000</MapScale>
<GridDistance>500</GridDistance>
<LayerField>OBJECTVAL/LayerField>
</File.MultipleFileImport>
<Database.Assign.Texts>
<Dataset>all</Dataset>
<TextField>ID</TextField>
<Symbol>101.0</Symbol>
<ReplaceExistingObjects>true</ReplaceExistingObjects >
</Database.Assign.Texts>
<Database.Assign.Angles>
<Dataset>all</Dataset>
<AngleField>ID</AngleField>
</Database.Assign.Angles>

<Database.Assign.Symbols>
<Dataset>all</Dataset>
<CntFile>C:\Albis\cnt\Landeskarte.cnt</CntFile>
</Database.Assign.Symbols>
<Database.Dataset.Remove>
<Dataset>all</Dataset>
</Database.Dataset.Remove>
<Map.OptimizeRepair>
<Enabled>true</Enabled>
</Map.OptimizeRepair>
<View.EntireMap>
<Enabled>true</Enabled>
</View.EntireMap>
<File.Save>
<Enabled>false</Enabled>
</File.Save>
<File.SaveAs>
<File>C:\Albis\Albis2.ocd</File>
</File.SaveAs>
<File.Close>
<Enabled>true</Enabled>
</File.Close>
<File.Exit>
<Enabled>false</Enabled>
</File.Exit>
</OcadScript>

==XML Script Partial Map==
{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| export || file || String || eg.: ‚ c:\export\PartialMap1.ocd ‘ OCAD creates files PartialMap1_1_1.ocd, PartialMap1_1_2.ocd,
|-
| export || coordSystem || Enumerated types || mm (paper), m (real world)
|-
| export || T, L, B, R || Float || top, left, bottom, right
|-
| export.loop || enabled horizontalPages verticalpages horizontalOverlap verticalOverlap || Bool Integer Integer Float Float || true, false number of pages in horizontal direction number of pages in vertical direction horizontal overlap in mm or m vertical overlap in mm or m
|}

Example xml file:

<ocadScript> // comment
<partialMapScript>
<export id="0"> // first export section
<file>c:\export\PartialMap1.ocd</file> // export file
<coordSystem>mm</coordSystem> // paper oder real world coordinates
<T>100</T> // export rectangle with Top Left point and Bottom Right point
<L>0</L>
50
<R>50</R>
<loop> // the loop export several ocd files. For this example 21 files.
<enabled>true</enabled>
<horizontalPages>7</horizontalPages>
<verticalPages>3</verticalPages>
<horizontalOverlap>10</horizontalOverlap> // horizontal and vertical overlap.
<verticalOverlap>10</verticalOverlap>
</loop>
</export> // second export section
<export id="1">
<file>c:\export\PartialMap2.ocd</file>
<coordSystem>mm</coordSystem>
<L>0</L>
<R>50</R>
50
<T>100</T>
<loop>
<enabled>false</enabled>
</loop> // export only one ocd file
</export>
</partialMapScript>
</ocadScript>

==XML Script Print==

Print parameters can be saved in a XML script.

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| File.Print.Printer || Name DmPaperSize DmDefaultSource DmPrintQuality DmColor DmMediaType || String Integer Integer Integer Integer Integer || Eg. ,HP Color LaserJet 2840 PCL' 9 15 600 2 272
|-
| File.Print.Portrait || Enable || Bool || true, false
|-
| File.Print.SpotColor || Enable || Bool || true, false
|-
| FilePrint.PartialMap || Range L, R, B, T || Integer Float || 1 Left, Right, Bottom, Top
|-
| File.Print.HoizontalOverlap ||   || Float || -12,74
|-
| File.Print.VerticalOverlap ||   || Float || 8.74
|-
| File.Print.PrintScale ||   || Integer || Eg. 25000
|-
| File.Print.Copies ||   || Integer || Number of copies
|-
| File.Print.Intensity ||   || Integer ||  
|-
| File.Print.LineWidth ||   || Integer ||  
|-
| File.Print.PrintGrid || Enabled || Bool || true, false
|}

==XML Script Export==

===AI (Adobe Illustrator), PDF===

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| export || file || String || eg.: ,c::\Export\Chlosterwald.ai‘
|-
| export || format || Enumerated types || AI, PDF
|-
| export.partialMap || enabled coordSystem   L, R, B, T   || Bool Enumerated types   Float   || true, false mm (page), m (real world) [only if partialMap=enabled] left, right, bottom, top [only if partialMap=enable]
|-
| export || print Scale || Integer ||  
|-
| export || colors || Enumerated types || normal, spotColors
|-
| export || combine || Bool || true, false [only if color = spotColors]
|-
| export.spotColors || enabled || Spotcolor name || [only if color = spotColors]
|}

===BMP, GIF, JPEG===

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| export || file || String || eg.: ‚c:\Export\Chlosterwald.bmp‘
|-
| export || format || Enumerated types || BMP, GIF, JPEG
|-
| export || resolution || Integer ||  
|-
| export || anti-alias || Bool || true, false
|-
| export || colorCorrection || Bool || true, false
|-
| export.partialMap || enabled coordSystem   L, R, B, T   || Bool Enumerated types   Float   || true, false mm (paper), m (real world) [only if partialmap=enable] left, right, bottom, top [only if patialmap=enable]
|-
| export.tiles || enabled width height || Bool Integer Integer || true, false [only if enabled = true] [only if enabled = true]
|}

EPS

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| export || file || String || eg.: ‚c:\Export\Chlosterwald.eps ‘
|-
| export || format || Enumerated types || EPS
|-
| export.partialMap || enabled coordSystem   L, R, B, T   || Bool Enumerated types   Float   || true, false mm (paper), m (real world) [only if partialMap=enable] left, right, bottom ,top [only if partialMap=enable]
|-
| export || printScale || Integer ||  
|-
| export || colors || Enumerated types || normal, spotColors
|-
| export.spotColors || enabled || Spotcolor name || [only if colors = spotColors]
|}

SVG (Scaleable Vector Graphics)

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| export || file || String || eg.: ‚c:\Export\Chlosterwald.svg ‘
|-
| export || format || Enumerated types || SVG
|-
| export.partialMap || enabled coordSystem   L, R, B, T   || Bool Enumerated types   Float   || true, false mm (paper), m (real world) [only if partialMap=enable] left, right, bottom ,top [only if partialMap=enable]
|-
| export || printScale || Integer ||  
|-
| export || compressFile || Bool || true, false
|}

TIFF

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
|export || file || String || eg.: ‚c:\Export\Chlosterwald.tif‘ If spotColors is enabled and colorsCombine=false then the filename is ‚c:\Export\Chlosterwald. Spotcolor name.tif ‘
|-
|export || format || Enumerated types || TIFF
|-
|export || resolution || Integer ||  
|-
|export || anti-alias || Bool || true, false
|-
|export || colorCorrection || Bool || true, false
|-
|export.partialMap || enabled coordSystem   L, R, B, T   || Bool Enumerated types     Float   || true, false mm (paper), m (real world) [only if partialMap=enable] left, right, bottom ,top [only if partialMap=enable]
|-
|export.tiles || enabled width height || Bool Integer Integer || true, false [only if enabled = true] [only if enabled = true]
|-
|export.geoRefTiff || enabled pixelSize createWorldFile || Bool Float Bool ||true, false in meter [only if enabled = true] true, false [only if enabled = true]
|-
|export || colors || Enumerated types || normal, spotColors
|-
|export || colorsCombine || Bool || true, false [only if color = spotColors]
|-
|export.spotColors || enabled || Spotcolor name || [only if color = spotColors]
|-
|export || color Mode || Integer || 0 = 32 bit CMYK 1 = 24 bit RGB 2 = 256 colors 3 = grayscale 4 = 8 bit CMYK 5 = 1 bit black/white 6 = halftone screen
|-
|export || compression || Integer || 1 = no compression 2 = CCITT 4 = FaxG4 5 = LZW
|}

DXF

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| export || file || String || eg.: ‚c:\Export\Chlosterwald.dxf ‘
|-
| export || format || Enumerated types || DXF
|-
| export || printScale || Integer ||  
|-
| export || convertOem || Bool || true, false
|-
| export || convertUnicode || Bool || true, false
|-
| export || objectsSelSym || Bool || true, false
|-
| export || exportAsSplines || Bool || true, false
|-
| export || coordinates || Enumerated types || mm, m
|}

Shape

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| export || file || String || eg.: ‚c:\Export ‘ (only path name
|-
| export || format || Enumerated types || SHAPE
|-
| export || Enabled || Integer || 0 = point objects 1 = line objects 2 = area objects 3 = text object
|-
| export || Dataset || Integer || All = Dataset - All objects eg.: 2 (Objects in dataset with index = 2)
|}

'''Example'''

The following example export an AI file and some BMP tiles. Each exportScript node can contain many
children.

<ocadScript> // comment:
<exportScript>
<export id="1"> // first export section
<file>c:\export\test.ai</file> // export file
<format>AI</format> // file format
<partialMap>
<enabled>true</enabled>
<coordSystem>mm</coordSystem>
<L>0</L> // coordinates for the partial map
<R>50</R>
50
<T>100</T>
</partialMap>
<printScale>10000</printScale> // export scale
<colors>normal</colors> // cmky or spot colors
</export>
<export id="2"> // second export section
<file>c:\export\exp.bmp</file>
<format>BMP</format>
<resolution>300</resolution> // raster resolution
<anti-alias>true</anti-alias>
<colorCorrection>true</colorCorrection>
<partialMap>
<enabled>false</enabled>
</partialMap>
<tiles> // tiles export
<enabled>true</enabled> // tile dimensions
<width>500</width>
<height>500</height>
</tiles>
</export>
</exportScript>
</ocadScript>

Previous Chapter: [[Database]]

Next Chapter: [[Course Setting for Orienteering]]

Back to [[Main Page]]

XML Script

2011-11-28T08:43:04Z

80.238.207.158: /* XML Script File Print */

(This function is only available in OCAD Professional!)

Choose this command to execute functions whose settings are defined in a XML file.

==Introduction==

Select '''Execute XML Script''' from '''File''' menu.

==XML Script General==

===File===

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| File.Open || File || String || ocd file name
|-
| File.Close|| Enable || Boolean || true, false
|-
| File.Save || Enable || Boolean || true, false
|-
| File.SaveAs || File || String || ocd file name
|-
| File.MultipleFileImport || Directory CoordinateSystem NewOffset Horizontally Vertically Angle MapScale GridDistance LayerField || String Integer Boolean Integer Integer Double Integer Double String || Directory of import files -1 = WGS 84, 1000 = existing grid true, false            
|-
| File.ExportOIM || File || String || html file name
|-
| File.Exit || Enabled || Boolean || true, false Close OCAD Program
|}

===View===

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| View.EntireMap || Enable|| Boolean || true, false
|-
| View.MoveTo || X Y || Double Double ||  
|}

===Map===

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| Map. OptimizeRepair|| Enable|| Boolean || true, false
|-
| Map.ChangeScale || NewScale || Integer || e. g. 10 000
|-
|   || EnlargeReduceSymbols || Boolean || true, false
|-
| Map.ConvertLayer|| CrtFile || String || crt file name
|-
| Symbol.LoadSymbolsFrom || File || String || ocd file name (with symbols to be loaded) The option ''replace existing colors and symbols'' is used
|}

===Database===

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| Database.Dataset.Remove || Dataset || String Integer || all for all databases 3, 2, 1, ... for only one or several 
|-
| Database.Assign.Symbols || Dataset   CntFile || String Integer String || all for all databases 1, 2, 3, ... for only one database   ex. 101.0 true, false (Default)
|-
| Database.Assign.Texts || Dataset   TextField Symbol ReplaceExistingObjects || String Integer String String Boolean || all for all databases 1, 2, 3, ... for only one database   ex. 101.0 true, false (Default)
|-
| Database.Assign.Angles || Dataset   AngleField || String Integer String || all for all databases 1, 2, 3, ... for only one database  
|-
| Database.CreateObjects || Dataset SelectSymbol Condition HorizontalCoordinate VerticalCoordinate Unit TextField HorizontalOffset VerticalOffset || Integer Double String String String Enum. types String Double Double || 1, 2, 3, ... Number of dataset Symbol numer. ex. 207,0 SQL String (ex. SYMBOL LIKE 207,0) Database fieldname Database fieldname m, km Database fieldname    
|}

Example xml file:
<OcadScript>
<File.Open>
<File>C:\Albis\albis_leer.ocd</File>
</File.Open>
<File.MultipleFileImport>
<Directory>C:\Albis\shp</Directory>
<NewOffset>enabled</NewOffset>
<Horizontally>670000</Horizontally>
<Vertically>230000</Vertically>
<Angle>20</Angle>
<MapScale>20000</MapScale>
<GridDistance>500</GridDistance>
<LayerField>OBJECTVAL/LayerField>
</File.MultipleFileImport>
<Database.Assign.Texts>
<Dataset>all</Dataset>
<TextField>ID</TextField>
<Symbol>101.0</Symbol>
<ReplaceExistingObjects>true</ReplaceExistingObjects >
</Database.Assign.Texts>
<Database.Assign.Angles>
<Dataset>all</Dataset>
<AngleField>ID</AngleField>
</Database.Assign.Angles>

<Database.Assign.Symbols>
<Dataset>all</Dataset>
<CntFile>C:\Albis\cnt\Landeskarte.cnt</CntFile>
</Database.Assign.Symbols>
<Database.Dataset.Remove>
<Dataset>all</Dataset>
</Database.Dataset.Remove>
<Map.OptimizeRepair>
<Enabled>true</Enabled>
</Map.OptimizeRepair>
<View.EntireMap>
<Enabled>true</Enabled>
</View.EntireMap>
<File.Save>
<Enabled>false</Enabled>
</File.Save>
<File.SaveAs>
<File>C:\Albis\Albis2.ocd</File>
</File.SaveAs>
<File.Close>
<Enabled>true</Enabled>
</File.Close>
<File.Exit>
<Enabled>false</Enabled>
</File.Exit>
</OcadScript>

==XML Script Partial Map==
{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| export || file || String || eg.: ‚ c:\export\PartialMap1.ocd ‘ OCAD creates files PartialMap1_1_1.ocd, PartialMap1_1_2.ocd,
|-
| export || coordSystem || Enumerated types || mm (paper), m (real world)
|-
| export || T, L, B, R || Float || top, left, bottom, right
|-
| export.loop || enabled horizontalPages verticalpages horizontalOverlap verticalOverlap || Bool Integer Integer Float Float || true, false number of pages in horizontal direction number of pages in vertical direction horizontal overlap in mm or m vertical overlap in mm or m
|}

Example xml file:

<ocadScript> // comment
<partialMapScript>
<export id="0"> // first export section
<file>c:\export\PartialMap1.ocd</file> // export file
<coordSystem>mm</coordSystem> // paper oder real world coordinates
<T>100</T> // export rectangle with Top Left point and Bottom Right point
<L>0</L>
50
<R>50</R>
<loop> // the loop export several ocd files. For this example 21 files.
<enabled>true</enabled>
<horizontalPages>7</horizontalPages>
<verticalPages>3</verticalPages>
<horizontalOverlap>10</horizontalOverlap> // horizontal and vertical overlap.
<verticalOverlap>10</verticalOverlap>
</loop>
</export> // second export section
<export id="1">
<file>c:\export\PartialMap2.ocd</file>
<coordSystem>mm</coordSystem>
<L>0</L>
<R>50</R>
50
<T>100</T>
<loop>
<enabled>false</enabled>
</loop> // export only one ocd file
</export>
</partialMapScript>
</ocadScript>

==XML Script Print==

Print parameters can be saved in a XML script.

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| File.Print.Printer || Name DmPaperSize DmDefaultSource DmPrintQuality DmColor DmMediaType || String Integer Integer Integer Integer Integer || Eg. ,HP Color LaserJet 2840 PCL' 9 15 600 2 272
|-
| File.Print.Portrait || Enable || Bool || true, false
|-
| File.Print.SpotColor || Enable || Bool || true, false
|-
| FilePrint.PartialMap || Range L, R, B, T || Integer Float || 1 Left, Right, Bottom, Top
|-
| File.Print.HoizontalOverlap ||   || Float || -12,74
|-
| File.Print.VerticalOverlap ||   || Float || 8.74
|-
| File.Print.PrintScale ||   || Integer || Eg. 25000
|-
| File.Print.Copies ||   || Integer || Number of copies
|-
| File.Print.Intensity ||   || Integer ||  
|-
| File.Print.LineWidth ||   || Integer ||  
|-
| File.Print.PrintGrid || Enabled || Bool || true, false
|}

==XML Script Export==

AI (Adobe Illustrator), PDF

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| export || file || String || eg.: ,c::\Export\Chlosterwald.ai‘
|-
| export || format || Enumerated types || AI, PDF
|-
| export.partialMap || enabled coordSystem   L, R, B, T   || Bool Enumerated types   Float   || true, false mm (page), m (real world) [only if partialMap=enabled] left, right, bottom, top [only if partialMap=enable]
|-
| export || print Scale || Integer ||  
|-
| export || colors || Enumerated types || normal, spotColors
|-
| export || combine || Bool || true, false [only if color = spotColors]
|-
| export.spotColors || enabled || Spotcolor name || [only if color = spotColors]
|}

BMP, GIF, JPEG

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| export || file || String || eg.: ‚c:\Export\Chlosterwald.bmp‘
|-
| export || format || Enumerated types || BMP, GIF, JPEG
|-
| export || resolution || Integer ||  
|-
| export || anti-alias || Bool || true, false
|-
| export || colorCorrection || Bool || true, false
|-
| export.partialMap || enabled coordSystem   L, R, B, T   || Bool Enumerated types   Float   || true, false mm (paper), m (real world) [only if partialmap=enable] left, right, bottom, top [only if patialmap=enable]
|-
| export.tiles || enabled width height || Bool Integer Integer || true, false [only if enabled = true] [only if enabled = true]
|}

EPS

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| export || file || String || eg.: ‚c:\Export\Chlosterwald.eps ‘
|-
| export || format || Enumerated types || EPS
|-
| export.partialMap || enabled coordSystem   L, R, B, T   || Bool Enumerated types   Float   || true, false mm (paper), m (real world) [only if partialMap=enable] left, right, bottom ,top [only if partialMap=enable]
|-
| export || printScale || Integer ||  
|-
| export || colors || Enumerated types || normal, spotColors
|-
| export.spotColors || enabled || Spotcolor name || [only if colors = spotColors]
|}

SVG (Scaleable Vector Graphics)

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| export || file || String || eg.: ‚c:\Export\Chlosterwald.svg ‘
|-
| export || format || Enumerated types || SVG
|-
| export.partialMap || enabled coordSystem   L, R, B, T   || Bool Enumerated types   Float   || true, false mm (paper), m (real world) [only if partialMap=enable] left, right, bottom ,top [only if partialMap=enable]
|-
| export || printScale || Integer ||  
|-
| export || compressFile || Bool || true, false
|}

TIFF

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
|export || file || String || eg.: ‚c:\Export\Chlosterwald.tif‘ If spotColors is enabled and colorsCombine=false then the filename is ‚c:\Export\Chlosterwald. Spotcolor name.tif ‘
|-
|export || format || Enumerated types || TIFF
|-
|export || resolution || Integer ||  
|-
|export || anti-alias || Bool || true, false
|-
|export || colorCorrection || Bool || true, false
|-
|export.partialMap || enabled coordSystem   L, R, B, T   || Bool Enumerated types     Float   || true, false mm (paper), m (real world) [only if partialMap=enable] left, right, bottom ,top [only if partialMap=enable]
|-
|export.tiles || enabled width height || Bool Integer Integer || true, false [only if enabled = true] [only if enabled = true]
|-
|export.geoRefTiff || enabled pixelSize createWorldFile || Bool Float Bool ||true, false in meter [only if enabled = true] true, false [only if enabled = true]
|-
|export || colors || Enumerated types || normal, spotColors
|-
|export || colorsCombine || Bool || true, false [only if color = spotColors]
|-
|export.spotColors || enabled || Spotcolor name || [only if color = spotColors]
|-
|export || color Mode || Integer || 0 = 32 bit CMYK 1 = 24 bit RGB 2 = 256 colors 3 = grayscale 4 = 8 bit CMYK 5 = 1 bit black/white 6 = halftone screen
|-
|export || compression || Integer || 1 = no compression 2 = CCITT 4 = FaxG4 5 = LZW
|}

DXF

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| export || file || String || eg.: ‚c:\Export\Chlosterwald.dxf ‘
|-
| export || format || Enumerated types || DXF
|-
| export || printScale || Integer ||  
|-
| export || convertOem || Bool || true, false
|-
| export || convertUnicode || Bool || true, false
|-
| export || objectsSelSym || Bool || true, false
|-
| export || exportAsSplines || Bool || true, false
|-
| export || coordinates || Enumerated types || mm, m
|}

Shape

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| export || file || String || eg.: ‚c:\Export ‘ (only path name
|-
| export || format || Enumerated types || SHAPE
|-
| export || Enabled || Integer || 0 = point objects 1 = line objects 2 = area objects 3 = text object
|-
| export || Dataset || Integer || All = Dataset - All objects eg.: 2 (Objects in dataset with index = 2)
|}

'''Example'''

The following example export an AI file and some BMP tiles. Each exportScript node can contain many
children.

<ocadScript> // comment:
<exportScript>
<export id="1"> // first export section
<file>c:\export\test.ai</file> // export file
<format>AI</format> // file format
<partialMap>
<enabled>true</enabled>
<coordSystem>mm</coordSystem>
<L>0</L> // coordinates for the partial map
<R>50</R>
50
<T>100</T>
</partialMap>
<printScale>10000</printScale> // export scale
<colors>normal</colors> // cmky or spot colors
</export>
<export id="2"> // second export section
<file>c:\export\exp.bmp</file>
<format>BMP</format>
<resolution>300</resolution> // raster resolution
<anti-alias>true</anti-alias>
<colorCorrection>true</colorCorrection>
<partialMap>
<enabled>false</enabled>
</partialMap>
<tiles> // tiles export
<enabled>true</enabled> // tile dimensions
<width>500</width>
<height>500</height>
</tiles>
</export>
</exportScript>
</ocadScript>

Previous Chapter: [[Database]]

Next Chapter: [[Course Setting for Orienteering]]

Back to [[Main Page]]

XML Script

2011-11-28T08:42:41Z

80.238.207.158: /* File Print */

(This function is only available in OCAD Professional!)

Choose this command to execute functions whose settings are defined in a XML file.

==Introduction==

Select '''Execute XML Script''' from '''File''' menu.

==XML Script General==

===File===

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| File.Open || File || String || ocd file name
|-
| File.Close|| Enable || Boolean || true, false
|-
| File.Save || Enable || Boolean || true, false
|-
| File.SaveAs || File || String || ocd file name
|-
| File.MultipleFileImport || Directory CoordinateSystem NewOffset Horizontally Vertically Angle MapScale GridDistance LayerField || String Integer Boolean Integer Integer Double Integer Double String || Directory of import files -1 = WGS 84, 1000 = existing grid true, false            
|-
| File.ExportOIM || File || String || html file name
|-
| File.Exit || Enabled || Boolean || true, false Close OCAD Program
|}

===View===

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| View.EntireMap || Enable|| Boolean || true, false
|-
| View.MoveTo || X Y || Double Double ||  
|}

===Map===

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| Map. OptimizeRepair|| Enable|| Boolean || true, false
|-
| Map.ChangeScale || NewScale || Integer || e. g. 10 000
|-
|   || EnlargeReduceSymbols || Boolean || true, false
|-
| Map.ConvertLayer|| CrtFile || String || crt file name
|-
| Symbol.LoadSymbolsFrom || File || String || ocd file name (with symbols to be loaded) The option ''replace existing colors and symbols'' is used
|}

===Database===

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| Database.Dataset.Remove || Dataset || String Integer || all for all databases 3, 2, 1, ... for only one or several 
|-
| Database.Assign.Symbols || Dataset   CntFile || String Integer String || all for all databases 1, 2, 3, ... for only one database   ex. 101.0 true, false (Default)
|-
| Database.Assign.Texts || Dataset   TextField Symbol ReplaceExistingObjects || String Integer String String Boolean || all for all databases 1, 2, 3, ... for only one database   ex. 101.0 true, false (Default)
|-
| Database.Assign.Angles || Dataset   AngleField || String Integer String || all for all databases 1, 2, 3, ... for only one database  
|-
| Database.CreateObjects || Dataset SelectSymbol Condition HorizontalCoordinate VerticalCoordinate Unit TextField HorizontalOffset VerticalOffset || Integer Double String String String Enum. types String Double Double || 1, 2, 3, ... Number of dataset Symbol numer. ex. 207,0 SQL String (ex. SYMBOL LIKE 207,0) Database fieldname Database fieldname m, km Database fieldname    
|}

Example xml file:
<OcadScript>
<File.Open>
<File>C:\Albis\albis_leer.ocd</File>
</File.Open>
<File.MultipleFileImport>
<Directory>C:\Albis\shp</Directory>
<NewOffset>enabled</NewOffset>
<Horizontally>670000</Horizontally>
<Vertically>230000</Vertically>
<Angle>20</Angle>
<MapScale>20000</MapScale>
<GridDistance>500</GridDistance>
<LayerField>OBJECTVAL/LayerField>
</File.MultipleFileImport>
<Database.Assign.Texts>
<Dataset>all</Dataset>
<TextField>ID</TextField>
<Symbol>101.0</Symbol>
<ReplaceExistingObjects>true</ReplaceExistingObjects >
</Database.Assign.Texts>
<Database.Assign.Angles>
<Dataset>all</Dataset>
<AngleField>ID</AngleField>
</Database.Assign.Angles>

<Database.Assign.Symbols>
<Dataset>all</Dataset>
<CntFile>C:\Albis\cnt\Landeskarte.cnt</CntFile>
</Database.Assign.Symbols>
<Database.Dataset.Remove>
<Dataset>all</Dataset>
</Database.Dataset.Remove>
<Map.OptimizeRepair>
<Enabled>true</Enabled>
</Map.OptimizeRepair>
<View.EntireMap>
<Enabled>true</Enabled>
</View.EntireMap>
<File.Save>
<Enabled>false</Enabled>
</File.Save>
<File.SaveAs>
<File>C:\Albis\Albis2.ocd</File>
</File.SaveAs>
<File.Close>
<Enabled>true</Enabled>
</File.Close>
<File.Exit>
<Enabled>false</Enabled>
</File.Exit>
</OcadScript>

==XML Script Partial Map==
{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| export || file || String || eg.: ‚ c:\export\PartialMap1.ocd ‘ OCAD creates files PartialMap1_1_1.ocd, PartialMap1_1_2.ocd,
|-
| export || coordSystem || Enumerated types || mm (paper), m (real world)
|-
| export || T, L, B, R || Float || top, left, bottom, right
|-
| export.loop || enabled horizontalPages verticalpages horizontalOverlap verticalOverlap || Bool Integer Integer Float Float || true, false number of pages in horizontal direction number of pages in vertical direction horizontal overlap in mm or m vertical overlap in mm or m
|}

Example xml file:

<ocadScript> // comment
<partialMapScript>
<export id="0"> // first export section
<file>c:\export\PartialMap1.ocd</file> // export file
<coordSystem>mm</coordSystem> // paper oder real world coordinates
<T>100</T> // export rectangle with Top Left point and Bottom Right point
<L>0</L>
50
<R>50</R>
<loop> // the loop export several ocd files. For this example 21 files.
<enabled>true</enabled>
<horizontalPages>7</horizontalPages>
<verticalPages>3</verticalPages>
<horizontalOverlap>10</horizontalOverlap> // horizontal and vertical overlap.
<verticalOverlap>10</verticalOverlap>
</loop>
</export> // second export section
<export id="1">
<file>c:\export\PartialMap2.ocd</file>
<coordSystem>mm</coordSystem>
<L>0</L>
<R>50</R>
50
<T>100</T>
<loop>
<enabled>false</enabled>
</loop> // export only one ocd file
</export>
</partialMapScript>
</ocadScript>

==XML Script File Print==

Print parameters can be saved in a XML script.

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| File.Print.Printer || Name DmPaperSize DmDefaultSource DmPrintQuality DmColor DmMediaType || String Integer Integer Integer Integer Integer || Eg. ,HP Color LaserJet 2840 PCL' 9 15 600 2 272
|-
| File.Print.Portrait || Enable || Bool || true, false
|-
| File.Print.SpotColor || Enable || Bool || true, false
|-
| FilePrint.PartialMap || Range L, R, B, T || Integer Float || 1 Left, Right, Bottom, Top
|-
| File.Print.HoizontalOverlap ||   || Float || -12,74
|-
| File.Print.VerticalOverlap ||   || Float || 8.74
|-
| File.Print.PrintScale ||   || Integer || Eg. 25000
|-
| File.Print.Copies ||   || Integer || Number of copies
|-
| File.Print.Intensity ||   || Integer ||  
|-
| File.Print.LineWidth ||   || Integer ||  
|-
| File.Print.PrintGrid || Enabled || Bool || true, false
|}

==XML Script Export==

AI (Adobe Illustrator), PDF

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| export || file || String || eg.: ,c::\Export\Chlosterwald.ai‘
|-
| export || format || Enumerated types || AI, PDF
|-
| export.partialMap || enabled coordSystem   L, R, B, T   || Bool Enumerated types   Float   || true, false mm (page), m (real world) [only if partialMap=enabled] left, right, bottom, top [only if partialMap=enable]
|-
| export || print Scale || Integer ||  
|-
| export || colors || Enumerated types || normal, spotColors
|-
| export || combine || Bool || true, false [only if color = spotColors]
|-
| export.spotColors || enabled || Spotcolor name || [only if color = spotColors]
|}

BMP, GIF, JPEG

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| export || file || String || eg.: ‚c:\Export\Chlosterwald.bmp‘
|-
| export || format || Enumerated types || BMP, GIF, JPEG
|-
| export || resolution || Integer ||  
|-
| export || anti-alias || Bool || true, false
|-
| export || colorCorrection || Bool || true, false
|-
| export.partialMap || enabled coordSystem   L, R, B, T   || Bool Enumerated types   Float   || true, false mm (paper), m (real world) [only if partialmap=enable] left, right, bottom, top [only if patialmap=enable]
|-
| export.tiles || enabled width height || Bool Integer Integer || true, false [only if enabled = true] [only if enabled = true]
|}

EPS

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| export || file || String || eg.: ‚c:\Export\Chlosterwald.eps ‘
|-
| export || format || Enumerated types || EPS
|-
| export.partialMap || enabled coordSystem   L, R, B, T   || Bool Enumerated types   Float   || true, false mm (paper), m (real world) [only if partialMap=enable] left, right, bottom ,top [only if partialMap=enable]
|-
| export || printScale || Integer ||  
|-
| export || colors || Enumerated types || normal, spotColors
|-
| export.spotColors || enabled || Spotcolor name || [only if colors = spotColors]
|}

SVG (Scaleable Vector Graphics)

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| export || file || String || eg.: ‚c:\Export\Chlosterwald.svg ‘
|-
| export || format || Enumerated types || SVG
|-
| export.partialMap || enabled coordSystem   L, R, B, T   || Bool Enumerated types   Float   || true, false mm (paper), m (real world) [only if partialMap=enable] left, right, bottom ,top [only if partialMap=enable]
|-
| export || printScale || Integer ||  
|-
| export || compressFile || Bool || true, false
|}

TIFF

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
|export || file || String || eg.: ‚c:\Export\Chlosterwald.tif‘ If spotColors is enabled and colorsCombine=false then the filename is ‚c:\Export\Chlosterwald. Spotcolor name.tif ‘
|-
|export || format || Enumerated types || TIFF
|-
|export || resolution || Integer ||  
|-
|export || anti-alias || Bool || true, false
|-
|export || colorCorrection || Bool || true, false
|-
|export.partialMap || enabled coordSystem   L, R, B, T   || Bool Enumerated types     Float   || true, false mm (paper), m (real world) [only if partialMap=enable] left, right, bottom ,top [only if partialMap=enable]
|-
|export.tiles || enabled width height || Bool Integer Integer || true, false [only if enabled = true] [only if enabled = true]
|-
|export.geoRefTiff || enabled pixelSize createWorldFile || Bool Float Bool ||true, false in meter [only if enabled = true] true, false [only if enabled = true]
|-
|export || colors || Enumerated types || normal, spotColors
|-
|export || colorsCombine || Bool || true, false [only if color = spotColors]
|-
|export.spotColors || enabled || Spotcolor name || [only if color = spotColors]
|-
|export || color Mode || Integer || 0 = 32 bit CMYK 1 = 24 bit RGB 2 = 256 colors 3 = grayscale 4 = 8 bit CMYK 5 = 1 bit black/white 6 = halftone screen
|-
|export || compression || Integer || 1 = no compression 2 = CCITT 4 = FaxG4 5 = LZW
|}

DXF

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| export || file || String || eg.: ‚c:\Export\Chlosterwald.dxf ‘
|-
| export || format || Enumerated types || DXF
|-
| export || printScale || Integer ||  
|-
| export || convertOem || Bool || true, false
|-
| export || convertUnicode || Bool || true, false
|-
| export || objectsSelSym || Bool || true, false
|-
| export || exportAsSplines || Bool || true, false
|-
| export || coordinates || Enumerated types || mm, m
|}

Shape

{| class="wikitable" style=" border="1"
|-
! style="width:13em" | Node <OcadScript>
! style="width:12em" | Parameter
! style="width:8em" | Data type
! style="width:19em" | Values / Description
|-
| export || file || String || eg.: ‚c:\Export ‘ (only path name
|-
| export || format || Enumerated types || SHAPE
|-
| export || Enabled || Integer || 0 = point objects 1 = line objects 2 = area objects 3 = text object
|-
| export || Dataset || Integer || All = Dataset - All objects eg.: 2 (Objects in dataset with index = 2)
|}

'''Example'''

The following example export an AI file and some BMP tiles. Each exportScript node can contain many
children.

<ocadScript> // comment:
<exportScript>
<export id="1"> // first export section
<file>c:\export\test.ai</file> // export file
<format>AI</format> // file format
<partialMap>
<enabled>true</enabled>
<coordSystem>mm</coordSystem>
<L>0</L> // coordinates for the partial map
<R>50</R>
50
<T>100</T>
</partialMap>
<printScale>10000</printScale> // export scale
<colors>normal</colors> // cmky or spot colors
</export>
<export id="2"> // second export section
<file>c:\export\exp.bmp</file>
<format>BMP</format>
<resolution>300</resolution> // raster resolution
<anti-alias>true</anti-alias>
<colorCorrection>true</colorCorrection>
<partialMap>
<enabled>false</enabled>
</partialMap>
<tiles> // tiles export
<enabled>true</enabled> // tile dimensions
<width>500</width>
<height>500</height>
</tiles>
</export>
</exportScript>
</ocadScript>

Previous Chapter: [[Database]]

Next Chapter: [[Course Setting for Orienteering]]

Back to [[Main Page]]