Laser-Distanzmessgerät

TruPulse 360°B

Connect to Laser Distance Meter

A connection to laser distance meters can be setup via a serial COM port. Use bluetooth for the data transfer from the laser distance meter to the computer.

1. Switch on the laser distance meter
2. Choose Connect to Laser Distance Meter from the GPS menu.
3. Set device, port and speed.
4. Click to the Test button to test the connection.

Laser Distance Meter Drawing Tool

Choose the Laser distance meter drawing mode. The Laser Distance Meter dialog appears.

Drawing options

Settings for different working processes can be done in the Options tab.

Direction: Choose between foresight and backsight.

• Foresight: Measure forwards from your known position to a place with unknown position.
• Backsight: Measure backwards from a place with known position to your unknown position.

Traverse mode: Choose between linear traverse and radial traverse

• Linear traverse: Measure a series of points. A measured point is the start position for the next measurement.
• Radial traverse: Measure a series of points. The start position is always the same.

Draw measures data automatically: Turn on this option if measured positions should be added to the map automatically. Otherwise each position must be confirmed by the user.

Add real world angle to azimut: Turn off this option if declination is already corrected by the laser range finder.

Drawing

1. Set a reference point: Set it by clicking on the map or get the GPS position.
2. Measure the features position. Depending on the Draw measures data automatically option the positions are added to the map automatically or they must be confirmed.
3. Finish a feature by clicking the Stop button.

Back to GPS

Back to Drawing an Object

Back to Main Page